Month: August 2025

Laser engraving the SAS triple mark or pyramid mark significantly improves the amount of Ki relay, so in the September-October issue we introduced a service that provides laser engraving on the surface of the seat head.

When we started this service, we first checked the sheet heads at our center and found damage to the internal etching sheet, especially on the edges, and noticed similar trends in several other members’ sheets. This could result in a drop in performance. So, rather than engraving from above, we came up with a method of cutting and removing the entire internal metal etching sheet, inserting a film-type element instead, and then re-adhering it.

Although there are concerns about the strength of the cuts, we have decided to repair them free of charge if they are damaged, and have made this method an official service. This will more reliably improve the amount of Ki relay. The original price per set was 38,500 yen, but we want more people to experience this effect, so we are offering it at half price until the end of this month.

This upgrade is available for up to 10 sets, but the current discount only applies to two sets, with a 20% discount for three sets or more.

We will also be offering a similar service for light heads that do not have laser engraving. This service involves laser engraving the internal etching sheet, and also costs 38,500 yen per side, but is available with a 20% discount for up to 10 sets. In addition, anyone purchasing a new seat head or light head will also offer a 20% discount.

＿＿Special Sale of HG White Sheets!＿＿

We’re releasing the HG White Sheet as a new Ki item to replace the Ki Plate Sheet. The back of this 30cm x 25cm, 1mm thick white PET resin sheet features two laser-engraved SAS triple marks, the same as those found on the base plate of the Hi Genki 8. The front features four pyramid marks in the same pattern as the film inside the sheet head. The half-size version is also available as an HG White Sheet.

Although it belongs to the category of Ki goods, it has both main body and head functions, so you can expect the same effects as Hi Genki. That’s why we added HG to the name, calling it the HG White Sheet. It’s like a Ki Plate Sheet with enhanced head functions, so it’s recommended for those who want to fully absorb Ki into their bodies. Because it’s vertically long, it’s best to place it under your body, from your head to your back or waist.

It’s also more effective when used in combination with a seat head or light head. To celebrate the release, we’re offering a 20% discount until the end of this month so that you can try it out.

Please take advantage of this opportunity to stay healthy and get through the hot summer.

As I mentioned last week, we have found that laser engraving the SAS triple mark and pyramid mark significantly improves the amount of Ki relay, and we are currently applying this to and improving various products.

We have now developed an improved version (Type 2) of the sheet head, which uses a special film with laser engraving instead of the conventional stainless steel etching sheet, and are now officially starting to sell it.

This new Type 2 uses a special film that is extremely thin yet has extremely low light transmittance, allowing for clear laser engraving. Compared to conventional products that require the insertion of a stainless steel etching sheet, not only is it expected to improve the amount of energy transfer, but because it is made entirely of resin, it bends flexibly, fits the body much better, and has a longer product lifespan.

Also, a message for those who own our previous products: We will start a service to increase the amount of Ki relay by laser engraving on the silicone surface of seat heads that have stainless steel interiors. For previous seat heads, we can engrave two pyramid marks per side, similar to HG cards, on both the front and back. The fee is 38,500 yen per side, so please take advantage of this service.

In addition, while we only have three in stock, we are offering a 30% discount on the conventional type Seat Head with laser engraving on one side, for 167,860 yen including the engraving fee, so please contact your nearest center.

In addition, we will be offering a limited sale of two plates (360mm square) with two flat pyramid patterns (approximately 10cm x 20cm) laser engraved on the surface for the special film we have developed, for a special price of 138,600 yen. If you are interested, please contact the center.

Additionally, starting next week, we will be gradually installing the laser-engraved Sheet Heads and plate sheets we talked about today at each center, so please come and experience the more powerful energy of Shinkiko.

As we approach the Obon period, a time when it is easy to feel a connection with our ancestors, we would like you to take in as much Ki as possible. Also, as the hot weather continues, it is becoming increasingly necessary to increase your Ki. Whether at home or at a center, we hope you will find ways to receive positive Ki more efficiently.

One of our members purchased a large B5-sized Shinkiko plate, but then asked us for advice, saying, “I want something stronger with the SAS triple mark, so I’d like to buy another one of the same thing.”

At that moment, I suddenly remembered that the customer had a High Genki Type 8. The bottom plate of the Type 8 is stainless steel, the same material and size as the large plate. “In that case, I’ll engrave the same triple SAS mark on the back of the Type 8 for the same price as the large plate,” I said, and laser engraved it for him.

As with this Type 8, there is a power-up service for the Ki relay device, which involves inserting a power unit with the SAS triple mark. However, the laser engraving on the bottom plate of this High Genki Type 8 seems to have a slightly different effect from the power-up service. Since then, several people have tried it, and the feedback has been positive, so we have decided to officially add it to our sales menu.

The price is 167,200 yen, the same as the B5 large plate. The price for one set of the power-up service is 184,800 yen, so it is a little cheaper. If you are interested, please contact us.

Furthermore, High Genki Type 8 is currently making regular rounds at centers around the country. One set of power units is already installed inside it, but from the 5th of this month, we will be making rounds with an even more powerful Type 8 that has been laser engraved using this method. We hope you will give it a try. By taking in Shinkiko on a daily basis, and sometimes even powerfully, negative energy will gradually transform into positive energy.

This laser engraving will bring more positive energy to support you, so please be aware of that.

The energy of Shinkiko from higher dimensions is the positive Ki that exists in this universe, but there is also positive Ki around us, like our ancestors, who are always supporting us. Not only the laser engraving of the High Genki Type 8, but also the power-up service that adds the SAS triple mark is designed to allow you to receive even stronger support from that positive Ki.

As I wrote in last week’s article, the positive energy you emit attracts positive energy from those around you through vibrational synchronization. This laser-engraved power-up series will make it even easier to receive support from others.